ARTIFICIAL GRASS – COMPLETE INSTALLATION PROCESS

How do we work?

The installation of artificial grass begins with evaluating the area. The ground is inspected to identify uneven spots, soil type, and any details that may affect drainage or stability. Then, the space is cleaned by removing natural grass, roots, stones, and any debris that could lift the surface over time.

The next step is leveling the ground. Imperfections are corrected, the soil is compacted, and a solid base is prepared. Then, a layer of gravel or crushed rock is added to improve drainage and prevent sinking. This layer is also compacted until it becomes completely firm.

Once the base is ready, a geotextile weed barrier is installed. Then the artificial grass roll is unrolled, making sure the fibers run in the same direction to achieve a uniform and natural finish. Necessary cuts are made to adjust the edges, and all pieces are aligned before securing them.

The seams between rolls are joined using special tape and professional adhesive, creating a clean finish with no visible lines. The edges are then secured with nails or staples depending on the surface type. Once the turf is installed, silica sand is added to provide weight, stability, and keep the fibers standing upright.

Finally, the entire surface is brushed to lift the blades and achieve a fresh, uniform, and realistic look. With proper installation, artificial grass is ready to enjoy for many years, offering low maintenance and an impeccable appearance at all times.

How do we work?

• Ground preparation
We inspect the area, clean if necessary, and remove trash, roots, debris, or any elements that could affect the project.
• Marking and digging holes
We mark the exact line of the fence and dig the holes to the correct depth to ensure maximum stability.
• Post installation
We level and secure each post using the appropriate technique depending on the type of fence, ensuring a firm and durable base.
• Panel assembly
Whether wood, PVC, or metal, we install the panels precisely, screwing or assembling each section to achieve a uniform and aesthetic finish.
• Final check and complete cleanup
We check alignment, stability, and final details. Then we leave the area clean, organized, and ready to enjoy.

How do we work?

• Evaluación y preparación del área
Inspeccionamos la superficie, nivelamos el terreno si es necesario y removemos cualquier residuo, hierba o material suelto para asegurar una base uniforme.
• Limpieza y marcación del diseño
Definimos líneas de guía que garantizan precisión en el patrón elegido y una instalación simétrica en todo el contorno de la piscina.
• Colocación de base y mortero
Aplicamos la mezcla adecuada para adherir correctamente las losas, asegurando resistencia y durabilidad incluso en áreas expuestas al agua.
• Instalación de las losas de cerámica
Colocamos cada pieza con precisión, manteniendo distancias exactas y nivelación perfecta para un acabado elegante, seguro y antideslizante.
• Aplicación de boquillas y sellado
Sellamos las juntas para proteger contra humedad, acumulación de suciedad y para facilitar la limpieza diaria.
• Revisión final y limpieza del área
Verificamos la firmeza, la alineación y el diseño completo. Luego dejamos el espacio totalmente limpio y listo para disfrutar.

How do we work?

• Site Assessment and Preparation
We assess the space, remove weeds, loose soil, or debris, and prepare the base to ensure stability throughout the design.

Layout and Style Definition
We mark lines, curves, or patterns according to the requested design, guaranteeing a uniform and harmonious distribution.

Base Preparation
We place the appropriate layer of sand, gravel, or compacted material to ensure leveling, drainage, and perfect support for the stones.

Stone Installation
We precisely position each piece, respecting distances, shape, and alignment. We aim for a natural yet well-organized finish, according to the chosen style.

Adjustment, Filling, and Compaction
We fill joints, adjust heights, and compact the area to ensure firmness and prevent shifting over time.

Final Inspection and Complete Cleaning
We verify that the design is uniform, safe, and visually appealing. Then we leave the area clean and ready to enjoy.

How do we work?

• Site Assessment and Preparation
We inspect the site, remove loose materials, weeds, or debris, and prepare the surface for precise installation.

• Design Marking and Leveling
We mark out each section of the chosen pattern, ensuring uniform proportions, straight lines, and a balanced design.

• Concrete Molding and Pouring
We prepare the base, place the formwork, and pour the concrete with the appropriate consistency to obtain firm, level, and long-lasting surfaces.

• Concrete Curing and Finishing
We allow the correct curing time and apply the necessary finishes to achieve a modern and uniform appearance.

• Artificial Turf Installation
We lay the turf strips along the pre-designed lines, cutting them to the exact length and securing them to prevent lifting over time.

• Final Inspection and Area Cleaning
We verify that the slabs are aligned, the turf is well integrated, and the overall design looks aesthetically pleasing and functional. We finish with a thorough cleaning of the area.

How do we work?

• Space Assessment
We analyze the area, take precise measurements, and define the ideal design based on the existing structure and the client's needs.

• Site Preparation
We level the space and prepare the base to ensure a firm and perfectly aligned installation.

• Main Structure Assembly
We install high-quality aluminum posts and beams, guaranteeing stability, precision in every joint, and a solid finish.

• Roof or Panel Installation
We attach the sheets, panels, or slats according to the chosen model, ensuring a weather-resistant and aesthetically uniform system.

• Final Adjustments and Details
We check leveling, joints, and finishes to guarantee a clean, elegant, and durable result.

• Complete Area Cleaning
We leave the space organized, free of materials and debris, and the pergola ready to be enjoyed.

How do we work?

• Site Assessment
We analyze the size, shape, and conditions of the terrain to define a design that efficiently utilizes every inch.

• Site Preparation and Clearance
We remove debris, loose soil, and vegetation, leaving a perfectly level base to ensure smooth play.

• Terrain Shaping
We create gentle slopes, curves, and shapes that mimic a real green, tailored to the available space and the client's preferences.

• Installation of Special Artificial Turf for Golf
We lay a high-quality surface designed to offer precise roll, durability, and a natural appearance.

• Installation of Holes, Borders, and Details
We integrate the elements of the minigreen, such as trophies, flags, decorative borders, and any requested customizations.

• Final Inspection and Complete Cleaning
We test the roll, verify that everything is level and functional, and leave the area completely clean and ready to enjoy.